Hello guys. Iam really happy with my last printed project. I'm a fresh owner of little monoprice delta mini. After a couple of tests I decided to try small CAR-A-MEL car. Everything in 50% scale ( theoretically it would be possible to 65% scale ). Front joints was necessary to quite remodel because of sterring. The rest of parts after some postproduction, cutting and grinding work well. Only turning needs little update. Maybe later :-)
As I wrote above, Printed on really cheap Monoprice Delta Mini at 0,1mm layer height and 0,4 noozle. All files was sliced in Simplify3D. Original profile needs some little updates. Because of delta printing was necessary to set 0,5mm Zhop ( especially the body that filled almost the entire height of the printer) , quite bigger retraction distance and higher temperature. The printer sometimes has a problem keeping the temperature constant.
All filament was classic PLA and ST-PLA from Creality.
And here few photos from print and build. Enjoy !
Stargazing is simply awesome. It is one of the only hobbies in the world that still has an organic feel to it
The market today is jam-packed with the best night vision binoculars for stargazing; everything from night vision goggles for stargazing reviewed here binoculars to Thermal night vision binoculars.
So I have compiled a list of the best night vision binoculars for stargazing that I reviewed personally along with an infobox on How Night Vision Binoculars Work near the Conclusion.
@Radek T what is length? 9 cm?
As we talked about, if someone with this mini delta, which is super compact, want try this, change noozle to 0.25 mm and hopefully this 50% downscale will work. I will try it.